Plant for large-size tyres cutting

This plant is meant for cutting a large-size tyres with metal or synthetic cord for pieces of required size.

urksh

Technical characteristics

Max diameter of cutting tyre, mm 4000
Power supply, kW 105
Average time of operating cycle, sec. 15
Max pressure into hydraulic system, MPa 32
Nominal pressure into hydraulic system, MPa 21
Max cutting force, kN 760
Dimensions, mm 6810 х 3055 х 2570
Weight, kg 8500
Plant for large-size tyres cutting, productivity 3 ton/hour or 1 large-size tyre/h
Know more

This plant is meant for cutting a large-size tyres with metal or synthetic cord for pieces of required size. The plant consists of a frame with platform for tyre loading, equipped with tyre fixer, upper cutting blades and a power drive. The L-shaped blades are installed onto two movable jointed L-shaped frame units, what form a power shear. The power shear is actuated by a power drive. The platform for tyre loading is equipped with a mechanism of lifting, tilting and slewing, as well as with a mechanism of platform linear displacement along the frame. The main technical characteristics are shown in the table.